A breakthrough in innovation.
The All New
Pro energy Pack
A powerful solution for in-vehicle applications.
Partners in power:
Goodbye Generators
Hello, clean energy.
Hello, clean energy.
Introducing the new and exclusive
Pro Energy Pack
from 
and 
Designed from the ground up to replace heavy and inefficient on-board generator systems.
Utilising leading-edge technology to create an intelligent high power, in-vehicle solution.
Successfully reducing weight, install space, emissions and cost.
The perfect solution for all these applications and more
The Power to Reduce Emissions.
The Power to Reduce Idle Times.
The clean and renewable alternative to generator reliant and drive shaft powered systems.
Reduce Payload. Reduce Fuel. Reduce Cost.
A modern solution for modern problems.
The Pro Energy Pack is designed to deliver high-power, high-energy storage and the fast recharging of auxiliary power, in vehicle.
Replace your heavy, expensive and inefficient generator or Power Take Off system (PTO), with a clean energy alternative.
Continue to power demanding loads such as air compressors, welders, electric stoves, and tyre balancing equipment with no compromise.
Utilising the Pro Energy Pack will reduce payloads, reduce fuel consumption, reduce your emissions and reduce running costs.
Increase your on board power equipment life with a flexible, industrial grade solution that works better for you, and our planet.
Maintenance Free.
No more upkeep. No more worries.
A system scaled to your power needs.
System Diagram
Click components for further details.
The Pro Energy Pack is designed to be easy to use and work intelligently to deliver 230V and 12V DC power to auxiliary loads, whenever required.
Bi-1248 DC-DC Charger
The Bi-1248 or ‘Sword’ DC-DC charger completes the 3 main elements of the Pro Energy Pack – designed to provide fast in vehicle charging from smart (EU6) and conventional alternator, the Sword converts 12VDC (alternator output) to 48VDC at 25A (1200W) to charge the lithium modules when driving.
Taking the example of two M48-50 in parallel (4800WH) the Sword can fully recharge in just 4 hours of driving.
The Sword is also connected to the CAN system allowing communication and reporting between the Kinergier Mobile, M48-50 lithium modules and in vehicle charger.
As a Bi-directional DC-DC charger the Sword also provides a regulated 12VDC output when the engine is off – converting 48VDC back to 12VDC at up to 100A allowing for DC loads to be connected and powered to the system.
When the engine is on, any loads connected to the 12VDC output of the Sword will be supplied directly from the alternator.
12V Output connects directly to the C13 Module for intelligent distribution and added DC functionality.
48V Lithium Modules (M48-50 | M48-100)
Compatible system lithium modules for use in the PEP are the M48-50 (48V 50Ah) or M48-100 (48 100Ah).
The M48-50 lithium modules are designed specifically for mounting inside a vehicle and utilise a protected metal reinforced structure.
Using LiFePO4 cells, each M48-50 module provides 2400 Watt Hour (WH) of energy. The larger M48-100 module provides 4800 Watt Hour (WH) of energy, with the capability to parallel up to 8 units – providing a massive 35.2KWh of energy storage if required.
Each M48-50 module weighs only 30KG making them 3x lighter than conventional AGM batteries.
Opt for the M48-100 and you can save space and reduce overall weight down to 40Kg without compromising storage capacity.
1C charging and discharging capability even under parallel configuration ensures the lithium modules can be fast charged and provide high discharge current to the inverter (2400W for every lithium module installed).
CAN connection between each lithium module ensures safe, efficient, and intelligent monitoring so maximising charge rates and life cycle – this allows 100% depth of discharge (DOD) without compromising battery and system life.
The integrated shunt provides real time state of charge (SOC) data. As an example the Kinergier Mobile 3.0S with integrated 40A charger when on shoreline can fully charge 2 x M48-50 modules (4800Wh) in just over 2 hours.
Kinergier Mobile Inverter-Charger (CM3.0S | CM5.0S)
The Kinergier Mobile inverter-charger delivers high reliability, performance and industry leading efficiency for mission critical applications. Its distinguishing surge capability makes it capable to power most demanding appliances, such as air compressors, welders, vacuum cleaners, electric saw, freezer, electric stove, air conditioner and tyre balancing equipment.
High charging current at 48V when connected to the grid ensures fast recharging of the 48V lithium modules.
The Kinergier Mobile is available with output power options of either 3000W or 5000W and can be successfully used as a standalone unit or can be used in parallel for a larger power output.
Up to 3 can be connected in parallel meaning it's possible to create a single phase system with a 9000W output utilising three C3.0S units or a system with a 15000W using three CM5.0S units.
With class leading components and innovative design, the Pro Energy Pack is a solid state and highly efficient system that gives the power back to businesses on the move.
" PPT's ability to work along side our growth and innovate solutions to niche problems has been key to our business. Every product has exceeded expectations and kept us on the cutting edge allowing us to keep our business, trims and barbers running smoothly. "
Liam Scriven - Trim-IT
Chief Operating Officer
Tested, perfected and already deployed successfully in a number of challenging in-vehicle applications.
Our Pro Energy Pack is providing auxiliary power to numerous vehicles across the country. From private coffee caterers Café2U, to the mobile barber franchise, Trim-IT.
Stay future proof, forever.
Compact and Modular Lithium Battery Storage.
- Clean and renewable 230V and regulated 12V DC power, in-vehicle
- High power solutions available as a single or three phase configuration
- Flexible and scaled to your power demands
- Solid state technology ensures a long service life
- Bi-directional DC to DC charging at 100A
- Fast deployment and easily redeployed across fleets
Up to 15KW Single Phase Power.
- Fast charging from AC and in vehicle allows more available energy and reduced waiting times
- Maintenance free with a 5 Year Warranty
- Solar ready with compatible TBB controller
- Multi-Level Battery Protection maximises cycle life
- High energy, high density lithium modules protected in reinforced metal casing
Intelligence & Excellence.
- Fast and easy to configure and program via mobile APP and TBB Link
- Real time data monitoring in the cloud of performance, use and fault conditions, and geo location with TBB Fleet
- Intelligent communications including State of Charge (SOC) control and custom SOC warnings
- Programmable Dry contact control (x2) for engine start signal and DC load control
The Pro Energy Pack
Exclusive to Portable Power Technology.
For any enquiries or to discuss your application, please call the PPT team for a friendly chat.